Includes pre-wired LED lamp, weather-proof switch, zip tie and fasteners.
 
Suit T4 and Tvan with Premium Kitchen
 
To Install - Tvan
1. Remove wind guard from end of kitchen
2. Stow kitchen and remove kitchen travel stop
3. WARNING - Kitchen can be extended beyond travel limit and may fall to ground - take appropriate care during the next steps.
4. Extend kitchen just far enough to reach behind kitchen - access wiring (A safety stand or second person is recommended, remember property damage and personal injury may result if you are not careful
5. Remove switch knock out - next to Merit socket
6. Install supplied switch
7. Remove cutlery draw from below sink to improve access
8. From the underside of the kitchen install supplied lamp - do not install screw trim covers
9. Route wiring from lamp to OE loom through hole provided and plug into OE loom - terminal pre-installed
10. Use supplied zip tie to ensure wiring is secure
11. Under kitchen LED is functional when the internal Master Switch is turned to the on position.
12. Reinstall in reverse order - remember to reinstall travel limit device to avoid personal injury.
NOTE - Lens repair tape (available on our store) can be used to change colour from white to orange.